۲۹29
Unpacking and setting up
Hook in the front panel at the bottom fi rst (13.),
then pivot upwards and press shut (14.).
Connect the power cable to the device fi rst
(15.), then to the socket (16.).
Note:
Use the original packaging to store the air
purifi er if you are not using it all year round.
Pack and store the fi lter cartridge airtight to
protect the activated carbon.
Insert the fi lter cartridge with the three tabs in
the notches provided and lock in position by
turning clockwise
(12.).
Hold the fi lter cartridge with both hands
using the recessed grips provided and turn it
anti-clockwise
(9.).
Take out the fi lter cartridge (10.) and remove
the protective fi lm (11.).
7.
8.
9.
14.
13.
13.
14.
10.
9.
10.
11.
12.
13.
14.
15.
16.
No operation of the air purifi er without the
complete and secure attachment of the
cladding and safety covers (motor safety
grill, air outlet grill, front panel etc.).
Safety information
To Next Page
Loading...