What to do if my IDEAL Air Cleaner won't switch on?
If your IDEAL Air Cleaner isn't turning on, ensure the power cable is securely connected to the back of the device and that the cable isn't damaged. Also, check that both ends of the power cable are properly plugged in. Verify that an original IDEAL filter cartridge is correctly inserted and clicked into place with all 3 tabs fully locked.
Why is automatic mode not working properly on my IDEAL AP140 PRO Air Cleaner?
If the automatic mode on your IDEAL Air Cleaner isn't functioning correctly, first wait until the calibration process is complete, which may take a few minutes. If the issue persists, the air quality sensor may be dirty. Clean the openings for the air quality sensor and dust sensor, as well as the air intake ducts and the interior of the air purifier where the filter cartridge is located, using a vacuum cleaner. If the air quality sensor is still not detecting air quality reliably, try calibrating it by briefly disconnecting the unit from the mains.
What to do if the buttons on my IDEAL Air Cleaner or remote control do not work?
If the buttons on your IDEAL Air Cleaner or its remote control aren't working, first disable the locking function on the remote control. If that doesn't work, unplug the power cable and then plug it back in. Check the battery in the remote control (3V lithium CR2025). Clean the IR receiver with a dry, lint-free cloth and ensure you are pointing the remote control at the air purifier. Note that after joining the power cord or exchanging the filter, the function of the remote control is blocked for about 10 seconds.
Why is my IDEAL Air Cleaner making loud noises?
If your IDEAL Air Cleaner is producing loud noises, the filter cartridge might be dirty, so clean the pre-filter with a vacuum cleaner. Ensure the device is placed on an even surface. You can also try setting a lower fan speed using the fan speed button.
Why don't the indicators on the control panel of my IDEAL Air Cleaner light up?
If the indicators on the control panel of your IDEAL Air Cleaner aren't lighting up, first switch the air purifier on by pressing the on/off button. Also, make sure to disable the Quiet function by pressing the Quiet button.
What to do if the indicators on my IDEAL AP140 PRO control panel are too dark in bright environments?
If the indicators on your IDEAL Air Cleaner control panel appear too dark in bright environments, clean the relevant section on the control panel.
How to fix IDEAL AP140 PRO Air Cleaner if it won't switch on?
If your IDEAL Air Cleaner won't turn on, first ensure the power cable is securely connected to the back of the device and that the cable isn't damaged. Then, check that both ends of the power cable are properly plugged in. Also, verify that an original IDEAL filter cartridge is correctly inserted and clicked into place with all 3 tabs fully locked, showing the padlock icon.
What to do if the buttons on IDEAL AP140 PRO or remote control do not work?
If the buttons on your IDEAL Air Cleaner or its remote control aren't working, try these steps: First, disable the locking function on the remote control. If that doesn't work, unplug the power cable and plug it back in. Check the battery (3V lithium CR2025) in the remote. Clean the IR receiver with a dry, lint-free cloth. Ensure you're pointing the remote control directly at the air purifier. Note that after joining the power cord or changing the filter, the remote control may be blocked for about 10 seconds.
What to do if automatic mode is not working properly on IDEAL Air Cleaner?
If the automatic mode on your IDEAL Air Cleaner isn't working correctly, allow a few minutes for the calibration process to complete. If the issue persists, clean the openings for the air quality sensor and dust sensor, as well as the air intake ducts and the interior of the air purifier with a vacuum cleaner. You might also try calibrating the air quality sensor by briefly disconnecting it from the mains.
Why the indicators on the IDEAL Air Cleaner control panel do not light up?
If the indicators on your IDEAL Air Cleaner's control panel aren't lighting up, first ensure the air purifier is switched on by pressing the on/off button. Also, check if the Quiet function is enabled and disable it by pressing the Quiet button.
General| Brand | IDEAL |
|---|---|
| Model | AP140 PRO |
| Category | Air Cleaner |
| Language | English |
To Next Page