۳۲32
Fan speeds
• Press the on/off button (A) to switch the air purifi er on or off.
• The air purifi er runs in automatic mode
. In automatic mode, the fan speed (G) automatically
adapts to the measured air quality. The worse the air quality, the higher the fan speed.
• Press the fan speed button (B) to exit automatic mode. The air purifi er now runs at
fan speed
. Press again to increase the fan speed to .
Press again to increase the fan speed to
, or to the turbofan speed .
• The turbo speed setting for fast purifi cation of the ambient air requires the air purifi er to run at
maximum capacity. This can only be selected manually.
Timer functions
Pressing the timer while the air purifi er is switched on activates the “switch-off timer”
after the
set time, the air purifi er switches off:
• Switch the air purifi er on (on/off button A).
• Press the timer button (C) to activate the timer. Press repeatedly to increase the timer time:
(h)
. Each number lights up in turn. Press the timer button again (no number
lights up) to disable the timer function.
• The timer indicator counts the respective time with (
Countdown). The remaining time is
displayed.
Pressing the timer button while the air purifi er is switched off activates the "switch-on timer"
after the set time, the air purifi er switches on.
A
On/off button
D
Quiet button
E
Air quality indicator
F
Filter replacement
indicator
I
Quiet indicator
K
IR receiver
H
Timer indicator
G
Fan speed indicator
J
Daylight sensor
L
Air quality sensor
B
Fan speed button
C
Timer button
Control panel
To Next Page
Loading...
Need help?
General
