IDEAL COMBI ESP 24 User Manual

DISPLAY CODE ON THE BOILER DESCRIPTION ACTION
Boiler chip card
(BCC)
not fitted
Please contact Ideal (if under warranty) or alternatively a Gas
Safe Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Outside sensor
failure
Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE contact
a Registered Gas Installer (RGII).
Low mains voltage Contact a qualified electrician or your electricity provider.
PCB fault PCB Fault. Please contact Ideal (if under warranty) or alternatively
a Gas Safe Registered Engineer if outside of the warranty period.
In IE contact a Registered Gas Installer (RGII).
Boiler resets in 15
minutes
1. Turn power off and on at the fused spur.
2. If the boiler fails to operate please contact Ideal (if under
warranty) or alternatively a Gas Safe Registered Engineer if
outside of the warranty period. In IE contact a Registered Gas
Installer (RGII).
False flame lockout Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
BCC activation fault Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
BCC fault Check system pressure is between 1 & 1.5 bar on the pressure
gauge. If the boiler fails to operate then please contact Ideal (if
under warranty) or alternatively a Gas Safe Registered Engineer
if outside of the warranty period. In IE contact a Registered Gas
Installer (RGII).
FAULT CODES.
28

IDEAL COMBI ESP 24 Specifications

General

Brand	IDEAL
Model	COMBI ESP 24
Category	Boiler
Language	English