IDEAL LOGIC CODE COMBI ESP1 26

LOGIC CODE COMBI ESP1
26 33 38
INSTALLATION
AND SERVICING
For Users Guide see reverse of book
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our
website www.idealboilers.com where you can download the relevant information in PDF format.
October 2016
UIN 215347 A01

IDEAL LOGIC CODE COMBI ESP1 26 Specifications

General

Brand	IDEAL
Model	LOGIC CODE COMBI ESP1 26
Category	Boiler
Language	English

Summary

General Boiler Information

Introduction, Operation, and Safe Handling

Gas Supply and Flue Installation

Installation Procedures

Boiler Assembly and Wall Mounting

Exploded view, unpacking, and procedures for wall mounting.

Flue System Installation and Terminal Positioning

Guidance on flue length, installation, and terminal placement.

Condensate Drain and Connections

Electrical Connections and Wiring

Information on electrical connections, installer wiring, and wiring diagrams.

Commissioning, Lighting, and Handover

Procedures for boiler commissioning, initial lighting, and user handover.

Servicing and Maintenance

Servicing Schedule and Panel Access

Component Removal and Cleaning

Fault Finding

Fault Finding Chart and Lockout Codes

A comprehensive chart listing fault codes and their corresponding diagnostic sections.

Specific Fault Diagnoses and Solutions

Detailed troubleshooting steps for ignition, flame, and pressure-related faults.

Sensor, Fan, and Operation Faults

Code of Practice

Benchmark Commissioning Overview

Commissioning Checklist and Service Record

Forms for recording installation details, commissioning checks, and regular servicing.

Combustion Analysis Guide

Flowchart and important information for performing CO level and combustion ratio checks.