To Next PageTo Next PageWhat to do if my IDEAL LOGIC CODE COMBI ESP1 38 Boiler has no hot water?
If your IDEAL Boiler isn't producing hot water, first, check that the mains power is turned on and the mode knob is in the summer position. If ‘0’ is displayed, contact Ideal Customer Services Helpline if your appliance is under warranty or a Gas Safe Registered Engineer, in IE a Registered Gas Installer (RGII), if out of warranty.
Current Gas Safety (Installation & Use) Regulations or rules in force.
This appliance must be earthed. Supply: 230 V ~ 50 Hz.
How to adjust domestic hot water and central heating temperatures.
Step-by-step guide to repressurising the central heating system.
Actions to take if a gas leak is suspected.
Recommended servicing schedule for the appliance.
Guide to diagnosing and resolving common boiler issues.
Action for low system water pressure.
Checks for gas supply and actions for flame loss.
Contact electrician for low mains voltage.
Checks for pressure and contact for overheat/no flow.
Checks for condensate pipe and gas supply for ignition lockout.
General