Do you have a question about the IDEAL Logic Combi 30 and is the answer not in the manual?
Manufacturer | IDEAL |
---|---|
Model | Logic Combi 30 |
Category | Boiler |
Type | Combi |
Output | 30 kW |
Dimensions (H x W x D) | 700 x 395 x 278 mm |
Warranty | 7 years |
Mounting | Wall-mounted |
ERP Rating | A |
CH Output (kW) | 24.2 kW |
DHW Output (kW) | 30.3 kW |
ErP Heating | A |
ErP Water | A |
Max Working Pressure | 3 bar |
Central Heating Flow Temperature Range | 30-80°C |
Gas Type | Natural Gas |
NOx Emissions (mg/kWh) | mg/kWh |
Ensures installation by a Gas Safe Registered Engineer as per regulations.
Specifies earthing requirement, voltage, frequency, and fuse rating.
Covers casing, compartment storage, fault conditions, and safe usage.
Step-by-step guide for initial boiler startup and checks.
Enables preheating of DHW heat exchanger for quicker hot water.
Details on adjusting DHW and central heating temperatures.
Explains how the boiler optimizes output for gas efficiency.
Details on using weather compensation for room temperature control.
Explains the automatic frost protection system and its operation.
Procedure for restarting the boiler after a fault condition.
Instructions on how to completely disconnect the boiler's power supply.
Guidance on monitoring and topping up central heating system pressure.
Instructions for thawing a frozen condensate pipe and preventative measures.
Details the boiler pump's self-check function.
Specifies the required space around the boiler for installation and servicing.
Critical safety instructions for suspected gas leaks.
Guide on how to clean the boiler's exterior.
Requirement for annual servicing by a Gas Safe Registered Engineer.
Guide for diagnosing and resolving issues with hot water supply.
Guide for diagnosing and resolving issues with central heating.
Guide for diagnosing and resolving issues with both heating and hot water.
Explains the meaning of various codes shown on the boiler's display.
Detailed list of fault codes, their descriptions, and resolution steps.