Need help?Do you have a question about the IDEAL icos system HE15 and is the answer not in the manual?
General| Output | 15 kW |
|---|---|
| Fuel Type | Natural Gas |
| Mounting | Wall Mounted |
| ERP Rating | A |
| Max Working Pressure | 3 bar |
| Warranty | 2 years |
| Boiler Type | Combi |
Details legal requirements for installation by CORGI registered installers in GB and competent persons in IE.
Specifies the required electricity supply, earthing, fusing, and isolation methods for the appliance.
Lists crucial operational warnings, including casing seal, storage in compartments, and handling of sealed components.
Explains the meaning of display codes like '0' (Standby) and 'C' (CH being supplied) during operation.
Provides a table showing approximate flow temperatures (°C and °F) for different thermostat knob settings.
Checks power, external programmer, room/cylinder thermostats, and room thermostat settings.
Addresses ignition failure ('L:F' code), checking gas supply, condensate pipe blockages.
Deals with overheat condition ('L:A' code), requiring a reset and installer contact if recurring.
Covers low system pressure ('H:R' code), re-pressurising the system, and checking radiator valves.
To Next Page
