IDEAL Vogue System Gen 2 S32 User Manual

When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our
website www.idealboilers.com where you can download the relevant information in PDF format.
March 2017
UIN 216172 A04
VOGUE SYSTEM GEN2
S15 S18 S26 S32
INSTALLATION
AND SERVICING

IDEAL Vogue System Gen 2 S32 Specifications

General

Brand	IDEAL
Model	Vogue System Gen 2 S32
Category	Boiler
Language	English

Summary

SECTION 1 - GENERAL

Safe Handling and Safety Regulations

Guidelines for safe manual handling and relevant safety standards.

Installation Requirements and Safety

Safety regulations, British Standards, and gas/flue installation requirements.

SECTION 2 - INSTALLATION

Flue Length and Pack Determination

Guidance on selecting correct flue kits and lengths.

Cutting and Setting Flue Length

Installing the Flue Assembly

Condensate Drain Installation

Flue Terminal Position Requirements

Guidelines for correct flue terminal placement and dimensions.

Water, Gas, and Filling Procedures

Electrical Connections and Mains Wiring

Safety, regulations, and connecting the boiler to mains supply.

Optional Controls and Internal Wiring

Detailed Wiring Diagram

Commissioning and Testing Procedures

Procedures for commissioning and testing the boiler.

Initial Lighting Procedure

Step-by-step guide for the first ignition of the boiler.

Checking CH & HW Cylinder Operation

General Checks and Handover

SECTION 3 - SERVICING

Servicing Schedule and Inspections

Recommended servicing intervals and general inspection procedures.

Component Cleaning Procedures

Component Replacement - General and Fan

Burner, Injector, and Thermistor Replacement

Electrode and Spark Generator Replacement

Valve, Trap, and PCB Replacement

Heat Exchanger and Expansion Vessel Procedures

SECTION 4 - FAULT FINDING

Fault Finding Chart and Lockout Procedures

Main fault finding chart and procedures for overheat, ignition, and flame loss lockouts.

Sensor and Flow Fault Troubleshooting

Fan and Water Flow Fault Troubleshooting

PCB and CH/HW Fault Troubleshooting

Troubleshooting for PCB connection issues and CH/HW faults.

Display and Boiler Fault Troubleshooting

Troubleshooting for display errors and general boiler faults.

SECTION 5 - SPARE PARTS

Code Of Practice

Installer Standards and Customer Service

Benchmark Commissioning and Servicing

Commissioning Checklist and Service Records

Forms for recording installation, commissioning, and service details.

Combustion Analysis Flowchart

Flowchart for performing CO level and combustion ratio checks.