EasyManua.ls Logo

IDEAL VOGUE Combi C32 - User Manual

IDEAL VOGUE Combi C32
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VOGUE COMBI GEN2
C26 C32 C40
USER GUIDE
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
January 2017 UIN 216173 A02

Other manuals for IDEAL VOGUE Combi C32

Question and Answer IconNeed help?

Do you have a question about the IDEAL VOGUE Combi C32 and is the answer not in the manual?

IDEAL VOGUE Combi C32 Specifications

General IconGeneral
BrandIDEAL
ModelVOGUE Combi C32
CategoryBoiler
LanguageEnglish

Summary

Introduction and Safety Precautions

Boiler Restart Procedure

Details the steps to restart the boiler after a shutdown.

Mandatory Safety Regulations

Outlines critical safety regulations for installation and use.

Important User Notes and Clearances

Key Operational Warnings

Lists crucial warnings and precautions for safe appliance operation.

Minimum Installation Clearances

Specifies required space around the boiler for safe operation and servicing.

Boiler Controls and Operation

Boiler Control Panel Overview

Identifies and explains the boiler's interface controls and status indicators.

Initial Boiler Startup Procedure

Step-by-step guide for starting and operating the boiler.

Boiler Ignition Lockout Fault

Explains the ignition lockout fault and its resolution.

Operating Modes and Temperature Adjustment

Describes boiler functions for different demands and how to adjust water temperatures.

Weather Compensation for Room Control

Explains how weather compensation affects room temperature control.

Boiler Shutdown and Restart Instructions

Instructions for safely turning off and restarting the boiler.

Frost and Overheat Protection Modes

Covers boiler protection mechanisms for frost and overheating conditions.

System Pressure, Filling, and Condensate Management

Low System Water Pressure Issues

Explains how to identify and address low system water pressure.

System Refilling Procedure

Detailed instructions and diagrams for refilling the heating system.

Condensate Pipe Freezing Solutions

Instructions for thawing a frozen condensate pipe and preventative measures.

Maintenance, Cleaning, and Safety

Critical Safety: Gas Leak Detection

Essential safety advice for suspected gas leaks.

Boiler Cleaning and Servicing Recommendations

Guidance on cleaning the boiler and the importance of routine servicing.

User Pre-Service Checks

Advice for users to check issues before requesting a service visit.

Fault Finding and Common Issue Resolution

General Fault Diagnosis Overview

Guides users through diagnosing and resolving common issues like no heating or low temperature.

Display Indicators and Settings Adjustment

Interpreting Normal Operation Display Icons

Explains the various screen indicators and their meanings during normal operation.

Specialized Display Modes and Service Alerts

Describes display indications for frost protection, pre-heating, and service due.

Adjusting Hot Water and Central Heating Settings

Guides users on adjusting hot water and central heating temperatures.

Disabling Functions and Setting Room Temperature

How to turn off functions and set the desired room temperature.

Menu System and Service Interval Management

Navigating the Boiler Menu

Explains how to access and use the boiler's menu for advanced functions.

Preheat Function and Efficiency Level Display

Details the pre-heat function and how to view the boiler's efficiency rating.

Resetting the Service Interval Reminder

Procedure for resetting the service reminder message after maintenance.

Related product manuals