Name: IDEAL INDEPENDENT C30
Brand: IDEAL
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Fault Finding

Fault Finding Fault Finding Fault Finding Fault Finding Fault Finding

Independent + Combi - Installation and Servicing

ALTERNATING ‘L’ AND ‘6’ - FALSE FLAME LOCKOUT

Restart the boiler, does Boiler Work OK?

Check routing and integrity of internal boiler

wiring is OK. Check condition of Flame Sense

Electrode and replace if deteriorated.

Separate the ame detection electrode in-line

connector. Is there continuity between the terminals

pins connected to the electrode?

YES

Replace Flame Detection Electrode

YES

Check routing and integrity of internal boiler wiring.

RESTART PROCEDURE - To restart boiler, turn mode knob to restart position and immediately turn knob back to required setting.

ALTERNATING ‘L’ AND ‘5’ - 5 RESTARTS WITHIN 15 MINS

Turn power off and on

ALTERNATING ‘F’ AND ‘1’ - LOW WATER PRESSURE

Are the Boiler and CH System lled with water and

all isolation and radiator valves open (check pressure

gauge is between 1 to 1.5 bar)?

Fill and vent the system and open all

isolation valves

YES

Are connections on water pressure sensor secure?

Re-t connections

Replace water pressure sensor

YES

Other manuals for IDEAL INDEPENDENT C30

Questions and Answers:

Need help?

Do you have a question about the IDEAL INDEPENDENT C30 and is the answer not in the manual?

General