IDEAL MAX System2 S15 - Page 7

User Guide
7
USER
Note. The temperatures shown below are for illustration purposes only. The measured temperatures will be shown on the boiler.
The display scrolls through a maximum of 3 messages under any operational condition, as shown above
1.8 DISPLAY FUNCTIONS - NORMAL OPERATION MODE
NORMAL OPERATION SCREENS
To Switch On
Press Mode Button &
then On
Menu Mode
O󰀨
To Switch On
Press Mode Button &
then On
O󰀨
O󰀨 Mode Winter Mode, DHW Demand
Target 60°C
Menu Mode
Ready
Radiator Target 60°C
Room Thermostat or
Timer O󰀨
On at 60°C
Winter Mode, DHW & CH Demands
Target 60°C
Menu Mode
Ready
Radiator Target 60°C
Hot Water Priority
On at 60°C
Winter Mode, CH Demand
Target 60°C
Menu Mode
On at 60°C
Radiator Target 60°C
Set by Room Stat
Ready
Summer Mode, No Heat Demand
Target 60°C
Menu Mode
O󰀨
To Switch On
Press Mode Button &
then On
Ready
Summer Mode, DHW Demand
Target 60°C
Menu Mode
On at 60°C
Winter Mode, No Heat Demand
Target 60°C
Menu Mode
Ready
Radiator Target
60°C
Room Thermostat or
Timer O󰀨
Ready
O󰀨
To Switch On
Press Mode Button &
then On
Service Required
Restart Menu Mode
Service Due
Phone 01482 498660
Boiler Frost Protection
Menu Mode
Boiler Frost Protection Active
Switch O󰀨 Temperature 19°C
WITH OUTSIDE SENSOR
CH Knob Rotated
Back Menu
Room Temperature Target
20°C
CH Knob Rotated
(outside sensor connected)
Back Menu
Target 60°C
To Switch On
Press Mode Button
Menu Mode
O󰀨
O󰀨 Mode
On Mode, No Heat Demand
On Mode, With Heat Demand
Target 60°C
Menu Mode
Ready
Timer O󰀨 or Room Thermostat & Cylinder
Thermostat O󰀨
Target 60°C
Menu Mode
On at 60°C
WITHOUT OUTSIDE SENSOR
How to adjust Boiler Temperatures