EasyManua.ls Logo

IDEAL RAJ-7K Series - User Manual

IDEAL RAJ-7K Series
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Jun 2022
RAJ-7K Series
Rolling Bridge Jacks
7,000 lb. Capacity
(High Mount & Low Mount)
ASSEMBLY & OPERATION INSTRUCTION MANUAL
RAJ-7K-H (High Mount)
RAJ-7K-L (Low Mount)

Questions and Answers

  • B
    Bruce RobinsonAug 11, 2025
    What to do if my IDEAL Jack drifts down and won't hold?
    • M
      Michael MoralesAug 11, 2025
      If your IDEAL Jack drifts down and won't hold, it could be due to several reasons. First, the release mechanism might be damaged or have missing parts, requiring you to replace them. Second, there could be external leakage, so locate the leak, repair it, and refill the reservoir. Finally, internal leakage could be the issue, in which case you should have the pump serviced by an authorized service center.
  • T
    toddwilliamsAug 19, 2025
    Why won't my IDEAL Rolling Jack raise after contacting the load?
    • S
      Seth MooreAug 19, 2025
      Your IDEAL Rolling Jack may not raise after contacting the load due to several reasons: * The jack is loaded beyond its capacity. Use the jack only to its rated capacity. * There is an external fluid leak at the pump, hose, or cylinder. Repair the leak and refill the reservoir. * There is internal leakage. Have the pump serviced by an authorized service center. * The release mechanism is damaged or has missing parts. Replace the damaged or missing parts. * The pump is low on fluid. Lower the jack, check the fluid level, and fill with AW32 hydraulic fluid. Locate and correct any leaks. * The pump is malfunctioning. Have the pump serviced by an authorized service center.
  • J
    Joshua WoodardAug 27, 2025
    Why won't my IDEAL Rolling Jack raise to full height?
    • E
      Elizabeth PalmerAug 27, 2025
      If your IDEAL Rolling Jack won't raise to its full height, it's likely because the pump is low on fluid. Lower the jack and check the fluid level. Fill it with AW32 hydraulic fluid, and then locate and correct any leaks.
  • D
    Donald RiggsSep 2, 2025
    What to do if IDEAL Jack lowers slowly or not at all?
    • R
      Rodney WilliamsSep 2, 2025
      If your IDEAL Jack lowers slowly or not at all, it could be due to a damaged release mechanism or missing parts, in which case you should replace them. Alternatively, the return flow of fluid might be restricted or blocked, so you should eliminate any blockage.

Summary

Description

Features

Details the key features and capabilities of the RAJ-7K Rolling Jacks.

Limited Warranty

Structural Warranty

Covers specific structural components for a five-year period.

Limited One-Year Warranty

Offers replacement of defective parts for one year for original purchasers.

Other Limitations

Specifies exclusions such as normal maintenance, wear parts, and on-site labor.

IDEAL RAJ-7K Series Specifications

General IconGeneral
CategoryJacks
SeriesRAJ-7K
BrandIDEAL
TypeRJ45
ShieldingShielded