Need help?Do you have a question about the IDENTEC SOLUTIONS iPOINT X and is the answer not in the manual?
Declaration stating conformity with essential requirements of EU Directive 2014/53/EU.
Details on Canada's wireless apparatus certification requirements and conditions.
Details on IECEx certification for electrical apparatus in hazardous areas.
Specific conditions that must be met for the safe use of the device.
Guidelines to prevent damage from static discharge.
Guidelines for safe installation and operation by trained personnel.
Procedures to ensure safe system use and immediate action in case of hazards.
Instructions for managing temperature changes to prevent condensation.
Detailed description of the iPOINT X device and its features.
Description of the UHF wireless communication interface and its range.
Description of the LF wireless communication interface and its range.
Pinout details for MASTER connectors using RS422/RS485.
Pinout details for HOST connectors using RS422/RS485.
Guidance on correctly connecting plugs based on coding pins.
Recommendations for cable selection and length based on EMC and ATEX requirements.
Explanation of the feature that detects if the device housing is opened.
Explanation of the function of each status LED on the device.
Step-by-step guide on accessing the device's connection chamber.
Instructions on how to update the device's firmware.
General| Frequency | 2.4 GHz |
|---|---|
| Protocol | IEEE 802.11b/g/n |
| Data Rate | Up to 150 Mbps |
| RF Power Output | 20 dBm |
| Protection Rating | IP65 |
| Interface | Ethernet |
| Power Supply | Power over Ethernet (PoE) |
| Antenna | Internal |
| Operating Temperature | -20°C to +60°C |
To Next Page