O = This substance is present at a concentration below the limit in SJ/T 11363-2006 in all of the homogeneous materials
for this part, and it has not been intentionally added to any metallic coating. (See SJ/T 11363-2006 for definition of
homogeneous materials)
X = This substance is present at a concentration above the limit in SJ/T 11363-2006, in at least one of the homogenous
materials for this part, or it has been intentionally added to a metallic coating. (See SJ/T 11363-2006 for definition of
homogeneous materials)
Notes: concentration limits of 1000 ppm (0.1% by weight) for lead, mercury, hexavalent chromium, polybrominated
biphenyls (PBB) and polybrominated diphenyls ether (PBDE), or 100 ppm (0.01% by weight) for cadmium.
Please refer to AeA’s website for an English translation of SJ/T 11363-2006 (or the latest revision of this document):
http://www.aeanet.org/governmentaffairs/gajl_MCV_SJT11363_2006ENG.asp
To Next Page
General