48
5 UNPACKING AND INSTALLATION
5.3 CONNECTION AND INSTALLATION OF THE ELECTRIC SUPPLY
Connect the electric plug (not included) to the electric cable on the machine.
(The work must be carried out only by a qualied electrician in compliance with regulation IEC 364 or the
equivalent regulation in force in the country where the pressure washer is used)
WARNING!
DO NOT TOUCH THE ELECTRIC PLUG WITH WET HANDS OR FEET!
5.4 TRANSPORT
The machine is placed on a wooden pallet and covered with cardboard packaging, held in place by pla-
stic strapping and metal staples. The machine is usually transported on lorries. The lorries are unloaded
using forklift trucks with appropriate brackets or manually, observing the applicable safety standards.
5.5 HANDLING
Always use the forklift truck to move or handle the product.
5.6 STANDARD EQUIPMENT
Make sure that the following are present in the packaging of the product purchased:
• STELLA high pressure washer
• High pressure hose
• Spray gun
• Lance
• Handle
• Use and maintenance manual
• Spare parts book
Copyright ©2016 Idrobase Group. All rights reserved.
To Next Page
Loading...
