IDS C-Thrue - Page 15

C-Thrue HARDWARE DESCRIPTION
IDS GeoRadar s.r.l. MN/2017/011 Rev 1.0 15/ 38
Handle
The C-Thrue handle (Fig. 9) is ergonomic and designed to operate the
system only with one hand.
Fig. 9 – C-Thrue handle
A safety tie (Fig. 10) is provided to attach the system to the wrist.
Fig. 10 – Safety tie
The User should make a knot around the C-Thrue handle with the slimmest
part of the lace, and then wear the lace on wrist from the wider side of the
lace (Fig. 11).
Fig. 11 – How to use the lace/tie