Need help?Do you have a question about the IDS IDS805 and is the answer not in the manual?
General| Model | IDS805 |
|---|---|
| Backlight | Yes |
| Voltage | 12VDC |
| Weight | 150g |
| Keys | 16 |
Important notes and recommendations for using the IDS805 system.
How to activate or respond to a fire alarm condition.
How to activate or respond to a panic alarm condition.
How to activate or respond to a medical alarm condition.
Using a special code under duress to disarm the system.
Viewing past alarm events and zone violations.
Reviewing zones that were bypassed during the last arming cycle.
Reviewing zones that have experienced a tamper condition.
Key recommendations and precautions for system operation and maintenance.
Meaning of the ARMED indicator states: Illuminated, Extinguished, Flashing.
Meaning of the AWAY indicator states: Illuminated, Extinguished.
Meaning of the POWER indicator states: Illuminated, Flashing.
Meaning of the READY indicator: Illuminated when system is ready to arm.
Meaning of ZONE indicator states: Illuminated, Extinguished, Flashing.
Check with installer about enabled system functions.
Details on Master, General, Maids, and Duress user codes.
Table for defining Zone Type and Zone Name.
Steps for arming in Away mode via keypad entry.
Using the [1] key for rapid Away arming.
Details on arming the system in Stay mode, including profiles.
Steps to program or select a Stay Profile for arming.
Procedure for Stay arming using a user code.
Using the [5] key for rapid Stay arming.
Arming the system in Stay mode and leaving the premises.
Using external devices for arming the security system.
How the system can be programmed for automatic daily arming.
Arming the system when certain zones are violated.
Arming the system with any zones violated.
Steps to temporarily deactivate a specific zone.
Steps to reactivate a previously bypassed zone.
Procedure for disarming the system using a user code.
Methods for disarming the system using external devices.
Procedure for activating and responding to a fire alarm.
Procedure for activating and responding to a panic alarm.
Procedure for activating and responding to a medical alarm.
Using a special code under duress to disarm the system.
Viewing zones violated or bypassed last time the system was armed.
Viewing zones bypassed during the most recent arming cycle.
Viewing zones where a tamper condition occurred.
Procedure for adding or modifying user codes.
Procedure for removing existing user codes.
Specifics on using the Maids Code for limited access.
Steps to designate zones that are automatically bypassed in Stay mode.
Steps to remove a zone's Stay zone designation.
Steps to designate zones that trigger a keypad buzzer alert.
Steps to remove a zone's Buzz zone designation.
Steps to designate zones that trigger a brief keypad beep.
Steps to remove a zone's Chime zone designation.
Identifying trouble conditions like low battery or AC failure.
How to interpret indicator lights for trouble conditions.
Troubleshooting common issues encountered during system arming.
Troubleshooting common issues encountered during system disarming.
Contact information for Central Station and Installer.
To Next Page
