8 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00
IDS805 USER MANUAL
3. Operation of the Keypad
To ensure correct operation of your security system it is essential to
familiarize yourself with the use of the keypad.
! The keypad has a buzzer, command entry keys, zone and
system status L.E.D.’s.
! The keypad is used to send commands to the system and to
display the current system status.
! The keypad(s) will be mounted in a convenient location within
the protected premises generally close to the entry/exit zones.
! After a preprogrammed period of inactivity, the keypad will
automatically enter into a power-save mode by turning off all the
indicators. The keypad “wakes up” or re-illuminates when any key
is pressed or any zones are violated. The power save feature is
programmable and may be disabled.
! A sensor which has registered an alarm condition will be
indicated on the keypad by the corresponding zone light flashing.
The keypad buzzer will sound under the following conditions.
! When any key is pressed during the entry of codes.
! Three times if one or more of the zones are violated when
attempting to arm the system.
! To indicate a trouble condition.
! During the entry/exit delay.
! Will sound 5 times when a chime zone is violated.
4. System Information
4.1 Programmed Functions
Check with your installer which of the following functions have been
enabled.
" Quick Away Arm
" Quick Stay Arm
" Arm with Entry/Exit or Follower Zones Violated
" Stay Arm
" Stay Arm and Go
" Forced Arming
" Push to Arm
" Siren Sound on Arm/Disarm (double toot - arm/ short toot - disarm)
" Panic Alarm
" Fire Alarm
To Next Page
Loading...
Need help?
General
