IDS 805 User Manual

1
IDS 805 Installer Manual 700-266-02H Issued September 2009

IDS 805 Specifications

General

Zones	8
Model	IDS 805
Backlight	Yes
Voltage	12V DC
Current	50mA
Display	LED
Operating Temperature	-10°C to +50°C

Summary

Control Keypad Overview

Keypad Indicator Functions

Explains the purpose of each indicator light on the IDS 805 control keypad.

IDS 805 Features and Introduction

Key Product Features

Lists the main features and capabilities of the IDS 805 alarm panel.

Installation and Wiring Guide

Panel Connection Diagram

Provides a visual guide for wiring the alarm panel and its peripherals.

Tamper Protection and Resistors

End-of-Line Resistor Configuration

Details the use of end-of-line resistors for zone supervision and tamper detection.

Telephone Communicator and Outputs

Communicator Connection and Protection

Explains phone line connection, protection, and programmable output functions.

Technical Data and Reset Procedures

Hardware Reset Switch Functionality

Outlines the process for performing a factory reset on the alarm panel.

Download Code Access

Managing Download Access and Codes

Programming Instructions

Introduction and Location Values

Introduces programming methods and explains binary representation of location values.

Programming the Panel

Step-by-Step Programming Procedure

Provides a detailed guide for programming the alarm panel's functions.

Program Location Summary

Location 0: Defaulting and Code Reset

Describes the options for defaulting the panel and resetting user codes.

Locations 1-8: Zone Characteristics

Details the configuration of zone types for zones 1 through 8.

Programmable Zone Types

Zone Type Definitions and Behavior

Defines various programmable zone types and their operational behavior.

AC Fail and Entry Delay Settings

Hardware Reset Switch Control

Programmable Output Controls

Output Options and Event Assignments

Defines programmable output functions and their event triggers.

Phone Number Options and Dialling

Dialling Modes and Phone Number Setup

Primary Communicator Settings

Account Codes and Format Configuration

Sets primary account codes and the communicator format for reporting.

Contact ID Reporting Codes

Standard Contact ID Event Codes

Installer ID and Zone Settings

Installer ID and Swinger Shutdown Settings

Zone Programmable Outputs

Configuring Zone Output Events

System Time and Automatic Arming

Setting System Time and Auto Arm Time

Configures the system clock and automatic arming schedule.