IDS 805 - Phone Number Options and Dialling; Dialling Modes and Phone Number Setup

24
IDS 805 Installer Manual 700-266-02H Issued September 2009
Figure 5: Strobe Output Sequence
Similarly, a fire detect output follows the sequence illustrated overleaf.
Figure 6: Fire Detect Output Sequence
NOTE:
Since multiple conditions may be programmed to a single output, it is essential to ensure that no
unwanted conditions are assigned to the same output.
LOCATION 42 Phone Number Options/Dialling Options
Provision is made for the panel to dial different phone numbers (locations 48-63 for primary number and
64-79 for the secondary number). The panel can be programmed to report to these phone numbers as
follows:
 Reporting codes can be programmed to report to a single central station (single reporting).
 Report independently to 2 central stations (dual reporting).
 The primary and secondary numbers may be joined to provide for a single number up to 32
digits.
 The numbers can be dialled using either tone or pulse dialling.