18 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00
IDS805 USER MANUAL
mitted to the monitoring company to inform them that you have
been forced to disarm the control panel by an intruder.
! It is advisable to choose a code that can be easily remembered
by all family (or staff) members.
9.0 Emergency Evacuation Plan
An emergency evacuation plan should be established in case of a fire:
! Draw up a floor plan of your premises showing windows, doors,
stairs and rooftops that can be used for escape.
! Indicate a suitable escape route for each room. Always
keep these routes free of obstruction.
! Establish a meeting place outdoors for a headcount of the
building’s occupants.
! Practice escape procedures.
10. System Memory
10.1 Alarm Memory:
The Alarm Memory displays any zones which were violated or
bypassed the last time the system was armed. If the ARMED indicator
is flashing before you disarm the system, a violation has occurred. To
view which zone was violated, disarm the panel and continue as
indicated below.
To Display Alarm Memory:
[0]
(Hold down the key until the keypad buzzer sounds)
1. Hold down [0] until the keypad buzzer sounds.
2. The READY indicator will extinguish and the keypad buzzer will
sound briefly.
3. Flashing zone indicators show which zones were violated
during the last armed period.
4. The memory status will be displayed for five seconds, or until the
[#] is pressed.
To Next Page
Loading...
Need help?
General
