EasyManua.ls Logo

iFan IF9012 - Page 14

Default Icon
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
c. Place and use the appliance on a horizontal, stable and dry surface. When
moving the appliance, make sure that it is in an upright position. Damage may
occur if the appliance is placed on an incline or decline.
d. To turn ON : Insert the plug of the power cable directly into the wall socket and
switch ON. Ensure that the plug fits tightly into the socket.
e. Press the POWER Button on the Control Panel or the Remote Control once
to turn the appliance ON or OFF.
f. Press the FAN MODE Button on the Control Panel or the Remote Control to
select between COOL ® DEHUMIDIFY ® FAN modes.
g. Press the WIND SPEED SELECTION Button on the Control Panel or the
Remote Control to toggle between HIGH, MIDDLE or LOW wind speed. When
in DEHUMIDIFY Mode, pressing the key does not work as it is set to the LOW
wind speed mode permanently.
h. Press the UP / DOWN Buttons on the Control Panel or the Remote Control to
make adjustments to the temperature or timer.
i. Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:
cover the appliance during functioning;
obstruct totally nor partially the Air Inlet & Air Outlet;
insert objects or body parts (including clothing and hair) through the Air Inlet /
Air Outlet to avoid personal injury or damage to the appliance when in
operation;
use insecticide sprays, aromatherapy oils or other flammable substances near
the appliance;
push the buttons on the Control Panel or Remote Control too forcefully;
use any of the following agents as a cleaner: gasoline, thinner, or benzene;
leave the appliance unsupervised during operation.
17. During operation, DO NOT touch the appliance with wet body parts, and it is
recommended to have between you and the standing surface, an isolating element
(for example, wearing shoes with rubber soles).
18. DO NOT soak the appliance (especially the Compressor) in water or other liquids,
wash it under the tap, or let any liquid flow into the internal casing of the appliance
(especially the Control Panel) to prevent electric shock. In case of accidental fall
in water, DO NOT try to take it out, but first switch the appliance off.
19. Switch the appliance OFF before unplugging the appliance. Plug and unplug the
power cable firmly holding it with dry hands. Always unplug the power cable before
emptying the appliance; to avoid overheating; if it is NOT used for a long period
and before storing, cleaning or performing any maintenance operation. Prior to the
latter, leave to cool for at least 30 minutes.

Related product manuals