SAFETY FUNCTIONS
Frost Protection Function
In COOL, DEHUMIDIFY or SLEEP mode, if the temperature of the exhaust pipe is
too low, the appliance will automatically enter protection status; if the temperature of
the exhaust pipe rises to a certain temperature, it automatically reverts to normal
operation.
Automatic Defrosting
The appliance has Automatic Defrosting function.
Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting
protection function after the compressor is turned off.
Overflow Protection Function
When water in the Water Pan exceeds the warning level, the appliance will
automatically sound an alarm, and the "FULL" indicator light will flash. The appliance
will stop operating. Follow the instructions below.
After the water is emptied, the appliance will automatically return to the original state.
To Next Page
Loading...