IFB 20BC5 - OVEN PROTECTION MODES; OVERHEATING PROTECTION; SENSOR MALFUNCTION PROTECTION

17
PROTECTION
OVERHEATING PROTECTION
When the system enters into super high temperature protection status, the digital display shows “E01”
and continues to beep until troubleshooting, then press “PAUSE/CANCEL”, the system comes back to
normal standby mode.
SENSOR MALFUNCTION PROTECTION
The system enters into protection mode when the system sensor is Short Circuited. The display shows
“E03” and continues to beep until press “PAUSE/CANCEL”, the system comes back to normal standby
mode.