ifi NEO iDSD - Oled Display; Multi-Function Knob

4
1. OLED display
The OLED display shows the audio format, sampling rate, volume and input mode.
2. Multi-function knob
This knob controls:
- Variable/Fixed mode (use with power button)
- Analogue volume control (turn)
- Mute (short press)
- Brightness (long press)
I) Variable/Fixed mode selection
This mode will determine whether or not the NEO iDSD analogue volume control is used.
The NEO iDSD must rst be switched off to allow mode selection when powering on.
Hold down the knob rst, and then press the power button to enter the Variable/Fixed mode selection.
Turn the knob to cycle between the two modes. Release to accept.
If no mode is selected the NEO iDSD will automatically select the previously used mode.Tip: