ifi ZEN Phono - Box Contents; Included Components

BOX CONTENT
Guide:
1. Power ON/OFF
This is the power switch.
2. MM input LED
This is a MM input suitable for MM
cartridges with the output
voltage higher than 2mV. Please
select Gain 1 at the rear.
3. MC HIGH input LED
This is a MC HIGH input suitable
for MC cartridges with the output
voltage less than or equal to 2mV.
Please select Gain 2 at the rear.
4. MC LOW input LED
This is a MC LOW input suitable
for MC cartridges with the output
voltage less than or equal to
0.5mV. Please select Gain 3 at the
rear.
5. MC V-LOW input LED
This is a MC V-LOW input suitable
for MC cartridges with the output
voltage less than or equal to
0.25mV. Please select Gain 4 at
the rear.
6. SUBSONIC Filter ON/OFF
This is the SUBSONIC filter switch.
The iFi-designed subsonic filter
will intelligently detect whether a
subsonic frequency is a warp or a
bass note. It will eliminate the
warps and let all the bass and
mid-range frequencies pass
through untouched. Therefore, it
will not affect the sound quality.
1 2 3 4 5 6
4