iFIT PRO-FORM PRO 2000 - Page 11

11
7. Set the console assembly (E) facedown on a
soft surface to avoid scratching the console
assembly. Remove and save the four
5/16" x 3/4" Screws (20).
Next, identify the Left and Right Trays (104, 105).
Attach the Trays to the console assembly (E)
with eight #8 x 3/8" Screws (36); do not over-
tighten the Screws.
E
7
36
20
20
105
104
36
36
8. IMPORTANT: To avoid damaging the
Crossbar (89), do not use power tools, and
do not overtighten the #10 x 3/4" Screws (6).
Orient the Crossbar (89) as shown. Attach the
Crossbar to the Handrails (83, 84) with four
#10 x 3/4" Screws (6) and four #10 Star Washers
(8); start all four Screws, and then tighten
them.
Then, tighten the four 5/16" x 2 1/2"
Screws (7).
89
8
8
6
7
83
8
6
84
7