IFM Electronic Ecomat 300 AC1154 User Manual

Operating instructions
Addressing unit
AC1154
704749 / 00 02 / 2010
UK

IFM Electronic Ecomat 300 AC1154 Specifications

General

Brand	IFM Electronic
Model	Ecomat 300 AC1154
Category	Control Unit
Language	English

Summary

Functions and Features

Safety Instructions

Introduction to AS-interface Version 2.1

Structure of the Addressing Unit

Battery Charge Indication

Explains the battery symbol indicating charge status and the need for recharging.

Operating Modes

Control Panel Buttons

Explains the function of each button (Read/On, Write/Set, Mode, +, -) on the control panel.

Addressing Mode

Supported Operating Modes Overview

Lists and briefly describes the operating modes supported by the AC1154 addressing unit.

Slave Address Activation and Setting

Details how to activate specific slaves and set their addresses using the control buttons.

Addressing Slaves with IR Interface

Instructions for addressing AS-interface slaves using an infrared adapter.

Other Operating Modes

Describes modes for reading and writing AS-interface data, including ID codes and I/O data.

Read ID Code or ID Code 2

Explains how to read the ID code of an AS-interface slave, with ID code 2 specific to version 2.1.

Read and Write ID Code 1

Details how to read and write ID code 1 for version 2.1 AS-interface slaves.

Read IO Code

Read and Write Data

Display and Write Parameters

Indication of the Peripheral Fault Flag

Error Messages