Need help?Do you have a question about the IFM Electronic Ecomot 100 CR2511 and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Protection Class | IP65 |
| Ambient Temperature | -40...85 °C |
| Operating Temperature | -40...85 °C |
| Storage Temperature | -40...85 °C |
| Housing Material | Plastic |
| Connection | M12 connector |
| Digital Inputs | 4 |
| EMC | EN 61000-6-2, EN 61000-6-4 |
| Output Type | Digital |
| CAN Interface | CAN 2.0B |
| Programming | CODESYS programmable |
| Shock Resistance | 30 g / 11 ms |
| Degree of Protection | IP67 |
| Output Current | 2 A (per output) |
Details physical dimensions, mounting procedures, and electrical connection requirements for the CR2511 module.
Lists and describes the supported error codes for EMCY objects in the CR2511 module.
Details the CR2511 function within the ecolog 100plus library for setting parameters and I/O data.
Lists the input and output parameters for the CR2511 function in the ecolog 100plus software.
Defines the CR2511 configuration data structure for setting parameters like guard time and channel modes.
Defines the CR2511 I/O data structure for reading and writing current module status and values.
To Next Page
