Need help?Do you have a question about the IFM Electronic PN2093 and is the answer not in the manual?
Describes operating modes [3]: PN2x12, PN2x43, PN2x14, PN2x15, and their limitations.
Explains hysteresis and window functions for output switching based on pressure limits.
Details how the analogue output signal (4-20mA or 0-10V) is configured and behaves.
Outlines the three-step process for setting parameters: selecting, setting value, and acknowledging.
Allows selection of operating mode 2 or 3, with implications for parameter reset and IODD usage.
Configures the function for OUT1 and OUT2, including hysteresis, window, or analogue signals.
Details the unit's self-diagnostic capabilities and how faults/warnings are displayed.
Describes operating modes [3]: PN2x12, PN2x43, PN2x14, PN2x15, and their limitations.
Explains hysteresis and window functions for output switching based on pressure limits.
Details how the analogue output signal (4-20mA or 0-10V) is configured and behaves.
Outlines the three-step process for setting parameters: selecting, setting value, and acknowledging.
Allows selection of operating mode 2 or 3, with implications for parameter reset and IODD usage.
Configures the function for OUT1 and OUT2, including hysteresis, window, or analogue signals.
Details the unit's self-diagnostic capabilities and how faults/warnings are displayed.
General| Type | Pressure sensor |
|---|---|
| Electrical design | DC PNP |
| Protection class | IP67 |
| Product Type | Pressure sensor |
| Model Number | PN2093 |
| Manufacturer | IFM Electronic |
| Application | Industrial |
| Media | Liquids, Gases |
| Process connection | G 1/4 |
| Housing materials | Stainless Steel |
| Output function | Normally open / closed; (selectable) |
To Next Page