Need help?Do you have a question about the IFM Electronic PN2594 and is the answer not in the manual?
Outlines essential safety precautions and responsibilities for safe operation and installation.
Covers communication, parameter setting, switching, and analogue output functions.
Provides step-by-step instructions for physically installing the pressure sensor unit.
Details the wiring procedures and requirements for connecting the device electrically.
Outlines the general three-step procedure for setting any parameter on the device.
Explains how to assign functions to the switching outputs (OUT1/OUT2).
Details setting the upper and lower limits for hysteresis and window switching functions.
Explains how to scale the analogue output signal to the desired pressure range.
Describes the device's self-diagnostic capabilities and how fault/warning indications are displayed.
Outlines essential safety precautions and responsibilities for safe operation and installation.
Covers communication, parameter setting, switching, and analogue output functions.
Provides step-by-step instructions for physically installing the pressure sensor unit.
Details the wiring procedures and requirements for connecting the device electrically.
Outlines the general three-step procedure for setting any parameter on the device.
Explains how to assign functions to the switching outputs (OUT1/OUT2).
Details setting the upper and lower limits for hysteresis and window switching functions.
Explains how to scale the analogue output signal to the desired pressure range.
Describes the device's self-diagnostic capabilities and how fault/warning indications are displayed.
General| Type | Pressure sensor |
|---|---|
| Measuring range | 0...10 bar |
| Protection class | IP67 |
| Manufacturer | IFM Electronic |
| Model Number | PN2594 |
| Application | Industrial |
| Process connection | G 1/4 |
| Electrical design | PNP |
| Operating voltage | 18...30 V DC |
| Product Type | Pressure Sensor |
To Next Page