Need help?Do you have a question about the IFM Electronic O1D102 and is the answer not in the manual?
General| Brand | IFM Electronic |
|---|---|
| Model | O1D102 |
| Category | Accessories |
| Language | English |
Explains how hysteresis maintains stable output switching based on measured values.
Describes the window function for monitoring defined acceptable ranges for object detection.
Explains the sensor's ability to output an analogue signal proportional to the distance.
Specifies requirements for measuring range, unambiguity, and avoiding reflective objects.
Explains how to operate the unit with IO-Link master port classes A and B.
Visual representation of the sensor's menu hierarchy and parameter flow.
Explains the configuration options for output 1, including switching functions.
Details setting the switch point for hysteresis function on output 1.
Explains setting near and far switch points for window function on output 1.
Covers configuration options for output 2, including switching functions and analogue signals.
Defines the measured value for the analogue output's start point (4 mA / 0 V).
Defines the measured value for the analogue output's end point (20 mA / 10 V).
Explains how to use the teach mode for setting sampling rate and repeatability.
General instructions for parameter setting, emphasizing the importance of initial unit selection.
Step-by-step guide on how to select and adjust individual parameter values.
Details setting the switch point for hysteresis function on output 2.
Explains setting near and far switch points for window function on output 2.
Guides on scaling the analogue output by defining start and end points.
To Next Page