IFM E30390 - Functions and Features; 3�1 Items Supplied; 3�2 System Requirements; 3�3 Software

4
3 Functions and features
The interface connects sensors with IO-Link capability to a PC and provides the
following options via the IO-Link interface:
• Reading of the current parameter setting�
• Parameter setting of the sensor�
• Reading of the current measured values and further process values�
The interface is not suitable for permanent installation as an automation device�
3.1 Items supplied
• IO-Link interface
• USB cable
• Plug-in power supply
• M12 cable
• Operating instructions
3.2 System requirements
• PC with Microsoft Windows® 7 SP1 / Microsoft Windows® 10
• Free USB 2�0 port
• Software for parameter setting and set-up of IO-Link sensors,
LINERECORDER DEVICE:
• QA0011 (USB stick) (→ 3.3)
• QA0012 (download) (→ 3.3)
3.3 Software
The following software is suitable for use with this interface:
3.3.1 LINERECORDER DEVICE
The software LINERECORDER DEVICE is supplied with the following items:
- Framework software LINERECORDER DEVICE
- Current set of IODDs
- Driver for interface