For example, in the state of video recording, it is necessary to press OK button to stop
video recording, then press mode button twice to switch to video playback interface, press
up/down button to select playback video, press OK button to play and pause, and press
mode button to exit playback mode in playback state.
3. Video/Picture Playback
This machine has a key lock function, which can lock the image that needs to be retained
without being covered by circulation. In the state of video recording, press the key short,
the recorder will lock the image and not be covered by the cycle.
4. One Key Lock Function
In the case of recording and saving at interval of 1 / 2 / 3 / 5 minutes, the dash cam will
automatically overwrite oldest file in the memory card once the memory is full.
(Note: any locked video files on the memory card will remain protected, and will not be
automatically deleted during Loop Recording.)
5. Loop Recording
When the camera is turned ON and the motion detection is ON, the dash camera will
automatically activate and record any movement that is detected in front of the camera,
and it stops recording when no dynamic motion appears.
6. Motion Detection
9
To Next Page
Loading...