iFUTURE M350 - Menu and Function Instructions; Menu Switching; Video Recording Function; Photo Taking Function

Brief Instruction of Functions
★ When the dash cam is Powered ON, it’ll automatically start recording.
★ Press OK Button to stop recording.
★ Short press Menu Button “ ” to enter into the menu setting interface.
★ Press the Up Button “ ” or Down Button “ ” to choose the specific parameter, at
last, press the OK Button “ ” to confirm the operation.
★ Press the Menu Button “ ” to exit the setting interface after finishing all functions
setting.
6. Menu Switching
Insert the TF card into the camera and connect to the external power, the dash camera will
automatically turn on and start recording, press OK Button to stop recording.
1. Video
In standby state, press the Mode Button to enter into the photo mode. At this time, the
upper left corner of the display screen icon has been converted from video to camera, and
the photo can be taken by pressing the OK button. If you need to switch back to video
mode, just press the mode button twice to return.
2. Photo
8