In standby state, press the menu button to enter into the system settings menu, and press
the [Up]/[Down] to select the setting date option. Just press OK to enter the menu settings.
Note: In order to effectively record the date and time of obtaining evidence of traffic safety
accidents, please set the correct time before using this machine.
7. Date/Time Settings
If the device is abnormal or dead during operation, the reset operation of the device can be
carried out by touching the RESET key through the reset hole of the housing with a small
needle.
Note: When this product is used due to improper operation, it can be restored to normal by
pressing the reset key and then booting.
8. Reset Key
10
To Next Page
Loading...