•
Burning pot, ash box and air inlets should be cleaned.
•
Fuel should be checked if wet or not. Fuel should not be damp.
•
Pellets should not be thrown manually into the combustion pot.
•
If the ignition is not properly done, the stove should be turned off and
combustion pot cleaned.
•
The inside of the stove should not wash with water.
•
If there is a fire in the chimney pipe, close the stove and contact the
competent authorities.
•
If the ignition fails, do not burn it with another burning substance.
•
Periodically check the smoke outlet duct.
•
No other fuel from the pellet fuels should be placed in the pellets tank.
•
The stove heat will yield losses of the use of open covers and exterior.
•
Fuel loading must be performed from the test menu to the fuel tank from the helix
to the burning
pot at the first start.
•
Never use flammable liquids and gases in the combustion pot.
•
İfyıl pellets stoves must not be installed into open, moisture, idle
places etc. Stove
must not have direct contact with outdoor
ambient.
•
If the product does not work properly, please turn it off.
•
The odor created by the protective paint on the stove during the first
combustion is short term, in this case open the doors and windows.
•
Automatic air prufier must be in the system.
•
The weight placed on the cooking surface should not exceed 35 kg.
2.
TECHNICAL SPECIFICATIONS
This device should be installed in accordance with the related regulation and EU
standards.
❖ EN 14785: 2006 - Solid fuel burning household type cookers -
properties and test methods
❖ 2006 / 42 / EC - Machinery Directive
To Next Page
Loading...
