54
Screen 6 is used to select which SMS
or email address (accounts) gets an
‘Events’ report.
Events will be listed time and date
stamped to indicate:
Alarms, Alarms Muted, Alarms Reset
Faults
Calibrations
Note the interval can be selected and
the time
Screen 7 is used to select which
SMS or email address (accounts)
gets a ‘Sensor Check’ report.
Sensor check provides a
calibration status and health
status of each detector on the
system.
Note the interval can be selected
and the time
GSM Module Functions
To Next Page
Loading...
