Why is my iGenix IG9800 Dehumidifier not collecting water?
If your iGenix Dehumidifier isn't collecting water, it might be because the room's temperature and humidity are too low, preventing the unit from operating effectively. Also, check the air intake filter for any blockages and clean it to ensure proper airflow.
What to do if my iGenix IG9800 is leaking?
If your iGenix Dehumidifier is leaking, first ensure the water tank is correctly installed by removing and refitting it. Also, the unit may have frozen; unplug it and allow the temperature to rise.
How to fix a loud iGenix Dehumidifier?
If your iGenix Dehumidifier is making a loud noise, re-position the unit on an even, stable surface.
What to do if fan and compressor are not working on iGenix IG9800 Dehumidifier?
If the fan and compressor on your iGenix Dehumidifier aren't working, check the mains power supply and ensure the control dial is not set to 'OFF'.
Details how to set the appliance's run-time using the timer function on the control panel.
Explains what happens when the water tank is full and how to manage it.
Describes the automatic defrost mode and conditions for its operation.
Instructions on how to connect a hose for continuous water drainage.
Guidance on cleaning the exterior of the unit and the air filters.
General| Humidistat | Yes |
|---|---|
| Noise level | 47 dB |
| Product color | White |
| Country of origin | China |
| Water tank capacity | 6 L |
| Suitable for room area up to | 33 m² |
| Suitable for room volume up to | - m³ |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 340 W |
| Operating temperature (T-T) | 5 - 32 °C |
Weight and Dimensions| Depth | 274 mm |
|---|---|
| Width | 390 mm |
| Height | 612 mm |
| Weight | 14500 g |
To Next Page
