How to fix iGenix IG9821 Dehumidifier when fan and compressor are not working?
If both the fan and compressor on your iGenix Dehumidifier aren't working, the unit may not be getting power. Check the mains power supply and ensure the control panel is switched to the “ON” position.
Why is my iGenix Dehumidifier not collecting water?
If your iGenix Dehumidifier isn't collecting water, there could be a couple of reasons. First, the room's temperature and humidity might be too low; the unit won't operate if the humidity is below the set level. Second, the air intake filter might be blocked. Try cleaning the filter to remove any obstructions.
What to do if iGenix Dehumidifier is leaking?
If your iGenix Dehumidifier is leaking, it could be due to a couple of issues. The water tank might not be installed correctly; try removing it and refitting it properly. Alternatively, the unit may have frozen; in this case, unplug it and allow the temperature to rise.
Why is my iGenix IG9821 Dehumidifier making a loud noise?
If your iGenix Dehumidifier is making a loud noise, the floor might be uneven. Try re-positioning the unit on an even, stable surface.
Guidance on positioning the dehumidifier for optimal performance and airflow. Ensure adequate clearance.
Details on various operating modes including Manual, Auto, High, Dry Clothes, Ioniser, Humidity Setting, Fan Speed, and Timer.
Instructions for activating child lock to prevent accidental changes and sleep mode to dim the display.
Explanation of frost protection mechanism and automatic unit restart after power interruption.
Information on handling the full water tank and utilizing the continuous drainage feature.
General| Brand | iGenix |
|---|---|
| Model | IG9821 |
| Category | Dehumidifier |
| Language | English |
To Next Page
