iGenix IG9851 - Operating Instructions; Appliance Location

9
OPERATING INSTRUCTIONS
Appliance Location
Where to position your dehumidier?
For best results; position the dehumidier somewhere central like a landing or
a hallway. As long as the internal doors are open, the excess moisture from all
the rooms in the house will migrate naturally towards the dehumidier and be
processed.
Note: A dehumidier operating in a basement will have little or no effect
in drying an adjacent enclosed storage area, such as a closet, unless there is
adequate circulation of air in and out of the area.
Note: For the rst use of the appliance, it is recommended to run the
dehumidier continuously for a full 24 hours.
• Plug the appliance into a suitable wall socket – the appliance will beep once
and will remain in standby mode.
• Press the Stand-By button to switch on the appliance.
Note: Make sure that the water tank is in the correct position. If the Tank Full
indicator illuminates, remove the tank and replace it in the correct position.
• The LED display will automatically display the Relative Humidity of the room;
you can now select the desired function:
• Place the unit in an upright position on a
dry, stable and at surface.
• The dehumidication will be most
efcient when the unit is operated in an
enclosed area, with external doors and
windows closed.
Note: If you experience interference
from other household appliances, such as a
television or radio, move the dehumidier at
least 70cm away.
• Allow at least 20cm of air space on
all sides of the unit to ensure good
circulation, and at least 40cm of space
next to the air outlet
40cm or more
20cm or
more
40cm or
more
20cm or
more
20cm or more