iHealth BP7 User Manual (English)

Other manuals for iHealth BP7

Questions and Answers:

C
carrilloreneeAug 14, 2025
What to do if iHealth Blood Pressure Monitor display reads “ERROR”?
- G
  Gwendolyn WarrenAug 14, 2025
  If your iHealth Blood Pressure Monitor displays “ERROR”, several factors could be the cause. Your blood pressure may be outside the measurement range, so retest to ensure it is within range. Movement of your wrist or the monitor during the test can cause this, so retest while keeping still. Check that the cuff is properly applied, and retest if needed. An irregular heartbeat (arrhythmia) can also cause this error; if you have a serious arrhythmia, this monitor may not be suitable, and you should consult your physician.
C
Christine GallegosAug 18, 2025
What to do if my iHealth BP7 reads “ERROR”?
- C
  Charles ShafferAug 18, 2025
  If your iHealth Blood Pressure Monitor displays an “ERROR” message, it means your blood pressure might be outside the measurement range. To resolve this, retest and ensure your blood pressure is within the specified measurement range.
L
Levi JohnsonAug 21, 2025
How to fix unstable Bluetooth connection on iHealth Blood Pressure Monitor?
- J
  Jill GutierrezAug 21, 2025
  If you are experiencing an unstable Bluetooth connection with your iHealth Blood Pressure Monitor, it could be due to an unsuccessful connection, an abnormal monitor state, or strong electromagnetic interference. Try resetting your iOS device. Also, reset the monitor by pressing the START/STOP button for about 10 seconds. Ensure that the monitor and iOS device are away from other electrical equipment.
D
Dawn RiveraAug 25, 2025
What to do if iHealth BP7 shows no response?
- D
  Diamond SmithAug 26, 2025
  If your iHealth Blood Pressure Monitor is not responding, it could be due to incorrect operation or strong electromagnetic interference. Reset the device by pressing the START/STOP button for about 10 seconds. Then, relaunch the app and reconnect the iOS device to the monitor.
J
Joel CarterAug 27, 2025
How to fix low battery on iHealth Blood Pressure Monitor?
- D
  Dylan WilkersonAug 27, 2025
  If your iHealth Blood Pressure Monitor indicates a low battery (less than 25%), charge the battery.
H
holiverAug 31, 2025
What to do if wrist was moved during iHealth BP7 test?
- P
  Pamela StewartAug 31, 2025
  If you moved your wrist or the iHealth Blood Pressure Monitor during the test, retest while ensuring not to move your wrist or the monitor.
L
Laura WilkersonSep 3, 2025
Why does my iHealth Blood Pressure Monitor display abnormal result?
- S
  Sarah PayneSep 3, 2025
  An abnormal result on your iHealth Blood Pressure Monitor could be due to: * Incorrect cuff placement or tightness. Review the cuff application instructions and retest. * Incorrect body posture during the test. Review body posture instructions and retest. * Speaking, moving, or being emotionally agitated during the test. Retest when calm, avoiding any movement or talking.
C
Clayton MatthewsSep 7, 2025
Why does my iHealth Blood Pressure Monitor display an abnormal result?
- K
  Kimberly PrattSep 7, 2025
  An abnormal result on your iHealth Blood Pressure Monitor could be due to several reasons. Ensure the cuff is correctly positioned and tightened. Also, make sure your body posture is correct during the test. Avoid speaking, moving your wrist or body, or being angry, excited, or nervous during the test. Retest when calm and still, after reviewing the cuff application and body posture instructions.
S
Sarah WebbSep 10, 2025
What to do if iHealth Blood Pressure Monitor displays ERROR?
- T
  Timothy HansenSep 10, 2025
  If your iHealth Blood Pressure Monitor displays an “ERROR” message, it could be due to several reasons: * Your blood pressure may be outside the measurement range. Retest to ensure your blood pressure is within range. * The monitor or your wrist might have moved during the test. Retest, ensuring you keep still. * The cuff may not be inflating correctly, or the pressure may be dropping too fast. Review the cuff application instructions and retest. This monitor is not appropriate for people with serious arrhythmia. Check with your physician. * Irregular heartbeat (arrhythmia) or improper cuff application may also cause this error.

iHealth BP7 Specifications

General

Type	Automatic
Pulse rate range	40 - 180
Placement supported	Wrist
Pulse rate measuring	Yes
Mean arterial pressure	-
Battery voltage	3.7 V
Number of batteries supported	1
Quantity per pack	1 pc(s)