To Next Page
B
Benjamin LawsonAug 12, 2025
What to do if battery charge of iHealth Blood Pressure Monitor is less than 25%?
- Aanthony63Aug 12, 2025
When the battery level of your iHealth Blood Pressure Monitor is less than 25%, you should charge it.
What to do if battery charge of iHealth Blood Pressure Monitor is less than 25%?
When the battery level of your iHealth Blood Pressure Monitor is less than 25%, you should charge it.
What to do if my iHealth Neo BP5S Blood Pressure Monitor LED display reads 'Er3'?
If your iHealth Blood Pressure Monitor displays 'Er3', it means the pneumatic system is blocked or the cuff is too tight during inflation. To resolve this, apply the cuff correctly and try again.
What to do if iHealth Blood Pressure Monitor LED display reads 'Er5'?
If your iHealth Blood Pressure Monitor displays 'Er5', it indicates that the cuff pressure is above 300mmHg. Wait five minutes and measure again. If the monitor continues to show abnormal readings, please contact the local distributor or the factory.
Why iHealth Neo BP5S LED display reads unstable readings?
If the LED display of your iHealth Blood Pressure Monitor shows unstable readings, this is likely due to an unstable pressure system. Please retest, ensuring that you remain still during the measurement.
What to do if my iHealth Blood Pressure Monitor is abnormal?
If your iHealth Blood Pressure Monitor is acting abnormally, try resetting it by pressing the START button for 10 seconds. Then, ensure the device is correctly connected and try again. If the issue persists, please contact the local distributor or the factory.
What to do if AC adapter of iHealth Neo BP5S is abnormal?
If you find that the AC adapter for your iHealth Blood Pressure Monitor is abnormal, replace it with a new one.
Why can't I use any AC adapter with iHealth Blood Pressure Monitor?
To prevent damage to your iHealth Blood Pressure Monitor, do not use any AC adapter other than the one specifically designed for it.
Can I use iHealth Blood Pressure Monitor while charging?
No, you should not use your iHealth Blood Pressure Monitor while it is charging.
General| Device Type | Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Measurement Location | Upper Arm |
| Display Type | LCD |
| Connectivity | Bluetooth |
| Wireless Technology | Bluetooth |
| Mobile App Compatibility | iHealth MyVitals |
| Compatibility | iOS, Android |
| Systolic Range | 60-260 mmHg |
| Diastolic Range | 40-199 mmHg |
| Pulse Rate Range | 40-180 bpm |
| Measurement Range (Pulse Rate) | 40-180 bpm |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse Rate) | ±5% |
| Cuff Size | 22-42 cm |
| Power Source | Battery |
Details correct sitting and lying down postures for accurate blood pressure measurement.
Guides on connecting the monitor to iOS/Android devices via Bluetooth for data sync.
