MAINTENANCE 9VX3
■ Walk-Around Inspection
Inspect the operator’s compartment for cleanliness. Keep it clean.
Inspect the loose bolts, tighten any loose bolts. Repair if necessary.
Inspect any cracks in boom and arm pivot area and cylinder
mounting brackets.
Repair if damaged.
Inspect attachment cylinders, linkage and bucket for damage or
excessive wear. Repair if damaged.
Inspect and remove any trash build up in the engine compartment.
Inspect the cooling system for leaks, faulty hose and trash built up.
Correct any leaks and remove any trash from the radiator.
Inspect the hydraulic system for leaks. Inspect the tank, cylinder rod
seals, tubes, plugs, joints and fittings. Correct any leaks.
Inspect and repair travel drive leaks. Check oil level if leakage is
noticed.
■ Daily Lubrication
Perform the daily lubrication as required by the Lubrication Chart.
4-5-4
To Next Page
Loading...
