OPERATION 9VX3
Changing Direction
Turning during traveling
Return the travel lever toward the neutral position a little
to change the direction during forward (or backward)
traveling.
When the lever of the intended turning direction is
returned a little, the m achine turns slowly in that direction.
Pivot turning (when blade is in front of machine)
Drive a single crawler to change the direction.
1. Pivot turn to the left
Push the right travel lever (1) to turn the machine
forward. Pull it back to turn the machine backward.
Forward
turning to left
turning to right
Pivot turn to left
WB-C210410
2. Pivot turn to the right
Use the left travel lever (2) in the same way.
Spin turning (when blade is in front of machine)
Drive the right and left crawlers in the reverse directions
to change the direction without traveling the machine.
1. Spin turning to the left
Push the right travel lever forward and pull back the left
lever.
2. Spin turning to the right
Pull back the right travel lever and push the left lever
forward.
Backward
turning to left
Pivot turn to right
WE?-C210 420
Spin turning
3-8-2
To Next Page
Loading...
