iHome WETVAC WV5 User Manual

iHome WETVAC WV5

19 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Owner’s Guide

Model iHWV5

ULTRA VERSATILE

WET + DRY VACUUM

For support content and the latest digital

copy of this manual, scan the QR code

above or visit iHomeclean.com

WETVAC

WV5

Table of Contents

Questions and Answers:

L
Larry RodgersAug 18, 2025
Why is my iHome WETVAC WV5 Vacuum Cleaner WETVAC not charging?
- M
  Mackenzie MontesAug 18, 2025
  If your iHome WETVAC isn't charging, consider these possibilities: * The power supply may not be properly connected. Ensure the adapter is plugged into a functioning wall outlet. * The WETVAC might not be fully seated on the charging station. Make sure the vacuum is properly docked; the LCD screen will light up when docked correctly. * You might be using an incorrect power adapter. Use the 27V power adapter included with your product.
J
joneswalterAug 20, 2025
What to do if my iHome Vacuum Cleaner WETVAC doesn't work?
- D
  Dustin HernandezAug 20, 2025
  If your iHome WETVAC isn't working, there are several potential causes: * The Dirty Water Tank might be full or not installed. You should empty and reinstall the Dirty Water Tank. * The battery may not be charged. Ensure you fully charge the battery. * The Roller Brush could be improperly installed. Check and correctly install the Roller Brush.
C
Courtney RushAug 23, 2025
How to fix iHome WETVAC WV5 when no water comes out when spraying?
- J
  Jerome ChanAug 23, 2025
  If no water comes out when spraying your iHome Vacuum Cleaner, here are a few things to check: * The clean water tank may be empty. Please fill it up. * The clean water tank might not be installed correctly. Re-install the clean water tank. * The sprayer holes could be clogged. Remove the roller brush and clean any buildup from the small rubber tubes.
H
Holly MoralesAug 26, 2025
Why is my iHome WETVAC WV5 getting weaker?
- T
  Tiffany HawkinsAug 26, 2025
  If your iHome Vacuum Cleaner is losing suction power, it could be due to: * A blocked HEPA filter. Check and clean the HEPA filter. * A missing HEPA filter. Ensure the HEPA filter is installed. * The brush guard not being installed properly. Follow step 5 on pg. 12 to ensure tight fitment of the brush guard.
S
susan69Aug 28, 2025
What to do if the clean water tank is leaking on my iHome WETVAC WV5?
- V
  Veronica LarsonAug 28, 2025
  If the clean water tank on your iHome Vacuum Cleaner is leaking: * The water volume might be higher than the snuffle valve. Pour out water until the volume is lower. * The clean water tank might not be installed correctly. Please re-install the water tank. * The cap may not be closed tightly. Ensure the cap is tightly closed.
H
hollypearsonAug 30, 2025
Why doesn't the handle control work on my iHome WETVAC WV5 Vacuum Cleaner?
- A
  Anthony LiAug 30, 2025
  If the handle control on your iHome Vacuum Cleaner isn't working: * The handle may not be fully inserted into the WETVAC. Please re-install the handle. * The battery might be low. Check the battery capacity and fully charge it.
R
robert55Sep 2, 2025
Why doesn’t my iHome WETVAC WV5 Vacuum Cleaner WETVAC work in self-cleaning mode?
- T
  Todd ObrienSep 2, 2025
  If your iHome WETVAC isn’t working in self-cleaning mode: * Ensure the WETVAC is connected to a power supply. * The dirty water tank might be full. Empty the dirty water tank. * There might be a lack of water. Fill up the clean water tank.
A
Andrew Weber MDSep 4, 2025
How to fix restricted floor brush movement on iHome WETVAC WV5?
- B
  Brett ThomasSep 4, 2025
  Ensure that the roller brush and roller brush housing is clean and properly installed.
E
Eric CortezSep 7, 2025
How to turn on voice assistance on iHome WETVAC WV5?
- B
  benjaminwilliamsSep 7, 2025
  If there is no voice assistance on your iHome Vacuum Cleaner, the voice function may be switched off. Turn on the voice switch.
K
Kevin KleinSep 9, 2025
What does Charging Current Error mean on iHome WETVAC WV5 Vacuum Cleaner?
- B
  burgesserikSep 9, 2025
  If you are getting a Charging Current Error, please ensure that the correct 27V power supply is being used.

iHome WETVAC WV5 Specifications

General

Model	WV5
Category	Vacuum Cleaner
Type	Wet/Dry
Surface Recommendation	Carpet
Weight	9.5 pounds

Summary

SAFETY

PRODUCT OVERVIEW

DIGITAL DISPLAY

Max Suction Mode

Indicates the vacuum is operating at maximum power.

Eco Suction Mode

Shows the vacuum is in energy-saving mode with reduced suction power.

Clean Water Tank Empty

Alerts that the clean water reservoir is depleted and needs refilling.

Battery Low

Signals that the battery charge is critically low and requires recharging.

Dirty Water Tank Full

Indicates the dirty water tank has reached its capacity and needs emptying.

Spraying Water

Shows the spray function is active, dispensing water for cleaning.

Voice Guidance On/Off

Indicates the status of the voice guidance feature, whether it's active or disabled.

Self Cleaning Mode

Confirms the self-cleaning cycle is initiated and running.

GETTING STARTED

Assembling the WETVAC

Step-by-step instructions for putting the vacuum cleaner together.

SETTING THE BASE STATION

CHARGING THE WETVAC

USING YOUR WETVAC

Filling the Clean Water Tank

Guide on how to properly fill the clean water reservoir for operation.

CLEANING FLOORS WITH THE WETVAC

CLEANING AND MAINTENANCE

Self Cleaning

Procedure for automatically cleaning the roller brush and vacuum port.

TANK AND FILTER CLEANING

ROLLER BRUSH CLEANING

CHARGING STATION & DRYING TRAY CLEANING

STORAGE

CARE FREQUENCY

TROUBLESHOOTING

The WETVAC can not be charged

Solutions for issues preventing the vacuum from charging.

The handle control doesn't work

Troubleshooting steps if the handle controls are unresponsive.

The WETVAC doesn't work

Reasons and fixes for the vacuum failing to operate.

The vacuum is getting weaker

Solutions for decreased suction power or performance.

The clean water tank is leaking

Advice for addressing leaks from the clean water tank.

No water comes out when spraying

No voice assistance

The WETVAC doesn't work in self-cleaning mode

ERROR CODES

Battery Error Codes (E1-E4)

Identifies battery-related errors and their causes.

Battery Temperature Errors (E5-E7)

Explains errors related to battery temperature and suggests solutions.

Charging Current Error (F1)

Addresses issues with charging current and provides troubleshooting steps.

Circuit Error (F2, F3)

Details circuit-related errors and potential fixes or support contacts.

Floor Brush Movement Restricted (F4)

Explains errors related to brush movement and how to resolve them.

Self Clean Error (F9)

Provides solutions for errors encountered during the self-cleaning cycle.

WARRANTY

Exclusions

Lists conditions and parts not covered by the limited warranty.

Warranty Support

Provides contact information and procedures for initiating a warranty claim.

Related product manuals

Preview: iHome NOVA S1

Preview: iHome VAC SV1

Preview: iHome AUTOVAC NOVA

iHome AUTOVAC NOVA

Preview: iHome AUTOVAC LUNA

iHome AUTOVAC LUNA

Preview: iHome STICK VAC SV6

iHome STICK VAC SV6

Preview: iHome AutoVac Luna Pro

iHome AutoVac Luna Pro

Preview: iHome AutoVac Eclipse iHRV2

iHome AutoVac Eclipse iHRV2

Preview: iHome AUTOVAC Eclipse Series

iHome AUTOVAC Eclipse Series

Preview: iHome AUTOVAC ECLIPSE iHRV10

iHome AUTOVAC ECLIPSE iHRV10