To Next Page
L
Lisa MyersSep 12, 2025
What to do if I get a Self clean Error on my iHome WETVAC WV5?
- AandrewballSep 12, 2025
Allow battery to charge, then re-start self-cleaning mode.
What to do if I get a Self clean Error on my iHome WETVAC WV5?
Allow battery to charge, then re-start self-cleaning mode.
What does Battery Temperature Error mean on iHome Vacuum Cleaner?
Allow the product to rest for 2 hours before trying again. Ensure the product is not sitting in direct sunlight.
General| Model | WV5 |
|---|---|
| Category | Vacuum Cleaner |
| Type | Wet/Dry |
| Surface Recommendation | Carpet |
| Weight | 9.5 pounds |
Indicates the vacuum is operating at maximum power.
Shows the vacuum is in energy-saving mode with reduced suction power.
Alerts that the clean water reservoir is depleted and needs refilling.
Signals that the battery charge is critically low and requires recharging.
Indicates the dirty water tank has reached its capacity and needs emptying.
Shows the spray function is active, dispensing water for cleaning.
Indicates the status of the voice guidance feature, whether it's active or disabled.
Confirms the self-cleaning cycle is initiated and running.
Step-by-step instructions for putting the vacuum cleaner together.
Guide on how to properly fill the clean water reservoir for operation.
Procedure for automatically cleaning the roller brush and vacuum port.
Solutions for issues preventing the vacuum from charging.
Troubleshooting steps if the handle controls are unresponsive.
Reasons and fixes for the vacuum failing to operate.
Solutions for decreased suction power or performance.
Advice for addressing leaks from the clean water tank.
Identifies battery-related errors and their causes.
Explains errors related to battery temperature and suggests solutions.
Addresses issues with charging current and provides troubleshooting steps.
Details circuit-related errors and potential fixes or support contacts.
Explains errors related to brush movement and how to resolve them.
Provides solutions for errors encountered during the self-cleaning cycle.
Lists conditions and parts not covered by the limited warranty.
Provides contact information and procedures for initiating a warranty claim.
