ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : MONITOR
<Front>
Power Button
Power O
Pressing and holding the Power Button on the front
for 3-5 seconds.
Power Indicator
White Normal Operation
Red
Standby Mode
When the power indicator light is lighting red, the
display is in Power Save Mode. To turn the screen
back on, you can press the power button on the
front or the remote control.
Red & White
Flashing slow
TheScreenOfunctionisactive.Toturnthe
screen back on, you can touch the screen or any
button on the remote control.
Red & White
Flashing fast
Going to the Standby Mode or system is updating.
Remote Sensor
Light Sensor
TYPE C2 IN
(5V,3A/9V,3A/
15V, 3A / 20V, 3.25A
/20V,5A)
USB-C 3.1 USB-C Connector
HDMI4 IN HDMI HDMI Connector
USB3.0
(5V,900mA)
USB3.0 USB Connector
Speakers (Facingforward)
Microphone Array *
Microphone Indicator White Microphone is in used.
*
After connecting the laptop to the display via Touch cable or USB-C cable, you may see
"Microphone(Built-inAudio)"listedinthedevices.
To Next Page
Loading...
Need help?
General