AmpliTube X-DRIVE
35
• MIX: regulates the amount of the dry and wet distorted signal. By default the mix is set to 100% WET.
From 0% to 100%.
• X-MODE: the X-MODE boosts the output signal to achieve more volume in certain parts during the
performance.
ON or OFF.
N.B. If you also want the Cab Sim when the pedal is bypassed, the BUFFER BYPASS MODE is required.
CRUSH Control Changes
Parameter Control Change # Values
DRIVE 21 0 – 127
BASS 22 0 – 127
MID 23 0 – 127
TREBLE 24 0 – 127
VOLUME 25 0 - 127
CUTOFF 46 0 - 127
DECIM 47 0 - 127
MID Q 48 0 - 127
MID FREQ 49 0 - 127
EQ POSITION 50 0 - 127
NOISE GATE 51 0 - 127
NG THRESHOLD 52 0 - 127
NG RELEASE 53 0 - 127
NG DEPTH 54 0 - 127
COMPRESSOR 55 0 - 127
COMP SENSITIVITY 56 0 - 127
COMP OUT 57 0 - 127
CAB SIM 58 0 - 127
MIX 59 0 - 127
X-MODE 13 0 - 127
When a parameter range is not linear its values are equally divided among the 128 steps of a Control Change
value.
To Next Page
Loading...
Need help?
General
